IP0x

JRPassphrase Registration Control

TODO list for each hardware target can be found as sticky topic in the corresponding forum

Page: 1

Post tools
- Subscribe

sam: Posts: 19

Siemens phones and callerid

Hi,
after spending a lot of time trying to get my caller id showing on my Siemens A580IP I decided to ask for help.
My IPBX is the Atcom IP02 FXS+FXO switchfin Revision 497.
What is working as expected:
Callerid on a Philips Onis Vox 380 with calls coming from PSTN, SIP trunks and internal calls.
Callerid on a Siemens A580IP as SIP client of the PBX with calls coming fron PSTN, SIP trunks and internal calls .

My problem is that callerid doesn't appear when my Siemens is plugged in the FXS analog port.

I tried different configuration changes:
cadence=250,1500,1500,3000,1500,3000
cidsignalling (bell, dtmf, v23...)
cidstart (ring, polarity...)

Perhaps someone already encountered this problem and could give me a hand.
Thanks

BR,
Sam

My config:
/etc/dahdi/system.conf

Code:


echocanceller = oslec,1,2

fxsks = 2

fxoks = 1

loadzone = fr

defaultzone = fr

/etc/asterisk/chan_dahdi.conf

Code:


[trunkgroups]

[channels]

usecallerid = yes

hidecallerid = no

usecallingpres = yes

echocancel = yes

echocancelwhenbridged = yes

immediate = no

/etc/asterisk/dahdi_scan.conf

Code:


[1]

active=yes

alarms=OK

description=Blackfin IP0x Board 1

name=WCTDM/0

manufacturer=Rowetel

devicetype=Blackfin IP0x

location=

basechan=1

totchans=8

irq=0

type=analog

port=1,FXS

port=2,FXO

port=3,none

port=4,none

port=5,none

port=6,none

port=7,none

port=8,none

/etc/asterisk/users.conf

Code:


[general]

fullname = 

userbase = 6000

hasvoicemail = yes

vmsecret = 1234

hassip = yes

hasiax = yes

hasmanager = no

callwaiting = yes

threewaycalling = yes

callwaitingcallerid = yes

transfer = yes

canpark = yes

cancallforward = yes

callreturn = yes

callgroup = 1

pickupgroup = 1

mwimonitor = fsk

mwilevel = 512

mwimonitornotify = __builtin__



[trunk_1]                                         

group = 1                                 

dahdichan = 2                             

hasexten = no                 

hasiax = no                   

hassip = no                   

trunkstyle = analog           

context = DID_trunk_1         

trunkname = Test           

busydetect = yes              

busycount = 3                 

ringtimeout = 8000            

answeronpolarityswitch = no   

hanguponpolarityswitch = no   

callprogress = no             

progzone = us                 

usecallerid = yes             

callerid=asreceived           

cidstart = ring               

pulsedial = no                

cidsignalling = bell          

flash = 750                   

rxflash = 1250                

mailbox =                               

gui_volume = 2                          

signalling = fxs_ks                     

gui_fxooffset = 0                       

rxgain = 0                              

txgain = 0.0                            

channel = 2



[6000]                                            

username = 6000                                   

transfer = yes                                    

mailbox = 6000                            

type = peer                               

call-limit = 100              

fullname =                    

registersip = no              

host = dynamic                

callgroup = 1                 

context = DLPN_DialFree       

cid_number = 6000             

hasvoicemail = no             

vmsecret =                    

email =                       

threewaycalling = no          

hasdirectory = no             

callwaiting = no              

hasmanager = no               

hasagent = no                 

hassip = no                   

hasiax = no                   

requirecalltoken = no         

secret =                      

nat = yes                     

qualify = yes                           

canreinvite = no                        

dtmfmode = rfc2833                      

insecure = no                           

pickupgroup = 1                         

signalling = fxo_ks                     

flash = 750                             

rxflash = 1250                          

dahdichan = 1

disallow = all                

allow = alaw,ulaw,gsm         

cadence  =  250,1500,1500,3000,1500,3000



...

Administrator has disabled public posting

2 Top

May-10-11 09:25:34

admin Posts: 354	Re: Siemens phones and callerid Hi Sam, Is the caller id missing only for Siemens phones? What is your opermode settings ? Best Regards Dimitar

	Administrator has disabled public posting

3 Top

May-10-11 10:42:19

sam Posts: 19	Re: Siemens phones and callerid Hi Dimitar, yes the caller id is only missing for Siemens phones. I also tried my philips base with a Siemens (Gigaset A58H) and a Philips DECT handset registered on it. The result is that the Philips handset is showing the caller id but nothing for the Siemens. When I connect my Siemens base directly on the PSTN line I get the caller id. Concerning the opermode it is actually set to France but I tried FCC and UK also without anymore success. Thank you for your help. BR, Sam

	Administrator has disabled public posting

4 Top

May-10-11 12:01:50

admin Posts: 354	Re: Siemens phones and callerid Hi Sam, Hmm I think this may appear as tough issue then. Are there any settings related to caller ID for the phone? Or any kind of specification? Probably you can compile the build with dahdi extra tools enabled. So you can do a recordings of the dadhi channel. This will show the exact FSK pattern. Probably the phone is expecting caller ID at different time or the FSK demodulation in the phone is too tight Best Regards Dimitar

	Administrator has disabled public posting

Page: 1

Index
» Developers
» IP0x
» Siemens phones and callerid

Most Active Users

admin Albi90 Gilles Chewi luckman212 ckleea switchfinreseller spiga

Board Info

Board Stats: Total Users: 2583 Total Topics: 290 Total Polls: 1 Total Posts: 1725 Dormant
User Info: Newest User : ZS6GDM Members Online: 0 Guests Online: 57