Home Forum Developers GUI 4.0 GUI wizard

JRPassphrase Registration Control

In order to register on this site, you must first submit the passphrase below.

TODO list for each hardware target can be found as sticky topic in the corresponding forum


admin
useravatar
User Info

GUI wizard

Hi Jason,

First of all congratulations! Great work on the wizard you have done!
It's simple but already useful in my opinion.

I was thinking what can be added, and I have few things in mind.
Let me share it here. Probably other people will comment as well.

- Add page for a SIP provider. It is probably good to indicate trunk registration directly on this page.
- Add ability to declare ring group with incoming calling rule bound to it.
- Add default outgoing calling rule. It is probably enough to be just documented in the wizard. For example _XXXX. or _9X.


What do you think, guys?

Best Regards
Dimitar


Administrator has disabled public posting
Albi90
useravatar
User Info

Re: GUI wizard

Hi Dimitar

All should be easy enough to do.
Do you think there would be any benefit to having a predefined list of SIP providers (so the user has the ability to pick from the list or manually enter).

Other than that the ring group and calling rule should be easy.

Any other ideas are welcome.

Thanks
Jason


Administrator has disabled public posting
fant
useravatar
User Info

Re: GUI wizard

Hi guys!
I say same about wizard.

Default IP address 192.168.1.100 not work in my network.
Please check algoritm in this case.
I writed firmware from tftp. First start. Sound pack not downloaded, because network not configured. Wizard started. I selected russian or french language, sound pack not downloaded again. Network configured. Reboot. English sound pack was downloaded. And now we select russian language again and downloading russian sound pack.

And while I created N sip users, created N+1 users.
And please add "Create Analog Port User" for IP02-IP08.

Thanks
Andrej


Administrator has disabled public posting
Albi90
useravatar
User Info

Re: GUI wizard

Hi Andrej

This is happening because the Create_Sounds script is hard coded to get English sounds, if your always going to get Russian sounds then you can change the SOUNDS_LANGUAGE=en line in trunk/package/uClinux-dist/vendors/Rowetel/IP04/scripts/create_sounds before you compile switchfin.

Thanks
Jason


Administrator has disabled public posting

Board Info

Board Stats:   Total Users: 2587  Total Topics: 299  Total Polls: 1  Total Posts: 1727  Dormant
User Info:   Newest User :  user2553   Members Online: 0   Guests Online: 117
Online  There are no members online
Topic
New
Locked
Topic
New
Locked
Sticky
Active
New/Active
Sticky
Active
New/Active
New/Closed
New Sticky
Closed/Active
New/Locked
New Sticky
Locked/Active
Active/Sticky
Sticky/Locked
Sticky Active Locked
Active/Sticky
Sticky/Locked
Sticky/Active/Locked