GUI 4.0

JRPassphrase Registration Control

TODO list for each hardware target can be found as sticky topic in the corresponding forum

Page: 1

Post tools
- Subscribe

ckleea Posts: 117	Problem in GUI SVN 426 There is a problem in this version causing unable to login in via GUI. The error message is http write error. I revert to SVN 422.

	Administrator has disabled public posting

2 Top

Oct-18-10 10:46:38

Albi90 Posts: 328	Re: Problem in GUI SVN 426 Hi ckleea We have done some major changes to the HTTPD to enable upload of Music on Hold, you will need to reset your configs for this update to work. Thanks Jason

	Administrator has disabled public posting

3 Top

Oct-18-10 11:03:44

ckleea Posts: 117	Re: Problem in GUI SVN 426 Thanks. Is iptables ok now? I can compile it but not seen in the firmware.

	Administrator has disabled public posting

4 Top

Oct-18-10 11:15:55

Albi90 Posts: 328	Re: Problem in GUI SVN 426 Hi ckleea haven't had a chance to test iptables yet, and we dont have GUI support for it yet but command line should be ok. Thanks Jason

	Administrator has disabled public posting

5 Top

Oct-18-10 11:26:04

ckleea Posts: 117	Re: Problem in GUI SVN 426 Can I just put the iptables rules into /persistent/etc? How to enable iptables? In centos, we need to chkconfig iptables on and service iptables start. In the firmware, the usual start command is /etc/init.d/iptables start and /etc/init.d/iptables enable. But I can't find the scripts for iptables.

	Administrator has disabled public posting

6 Top

Oct-18-10 12:00:47

Albi90 Posts: 328	Re: Problem in GUI SVN 426 Hi ckleea you should be able to use iptables -a to add your rules then to save iptables-save -c > /persistent/etc/iptables.rules then to start iptables-restore < /persistent/etc/iptables Thanks jason

	Administrator has disabled public posting

7 Top

Oct-18-10 12:32:16

ckleea Posts: 117	Re: Problem in GUI SVN 426 I have to wait for a while before upgrade to the svn 426. The Http.conf has many changes. Despite I go back to the old http.conf, I am unable to login at the GUI. In the http.conf og svn 426, you have enabled login from localhost only. [general] enabled = true enablestatic = false bindaddr = 127.0.0.1 bindport = 8888 prefix =

	Administrator has disabled public posting

8 Top

Oct-18-10 14:42:35

Albi90 Posts: 328	Re: Problem in GUI SVN 426 Hi ckleea This is because we now only use the asterisk httpd via a reverse proxy. We now use the busybox httpd which supports upload and a host of new features that will allow us to expand and develop the GUI further. Thanks Jason

	Administrator has disabled public posting

9 Top

Oct-18-10 14:44:43

ckleea Posts: 117	Re: Problem in GUI SVN 426 Hi Jason, How to access the box via GUI? I notice that the manager.conf also changes and bind to the localhost port and deny access from outside. CK

	Administrator has disabled public posting

10 Top

Oct-18-10 15:10:32

Albi90 Posts: 328	Re: Problem in GUI SVN 426 Hi ckleea Can you remove your build dir and run svn up looks like busybox is not being rebuilt with the new HTTPD. Thanks Jason

	Administrator has disabled public posting

11 Top

Oct-18-10 15:37:26

ckleea Posts: 117	Re: Problem in GUI SVN 426 Ok, Will try now.

	Administrator has disabled public posting

12 Top

Oct-19-10 04:56:13

ckleea Posts: 117	Re: Problem in GUI SVN 426 Hi, I tried several times and looks the same. Perhaps I will wait for while for your update in the source codes.

	Administrator has disabled public posting

13 Top

Oct-19-10 07:24:05

Albi90 Posts: 328	Re: Problem in GUI SVN 426 Hi ckleea Running a full test now on a IP02 Thanks Jason

	Administrator has disabled public posting

14 Top

Oct-19-10 08:35:39

Albi90 Posts: 328	Re: Problem in GUI SVN 426 Hi ckleea I have just done a full recompile and tested on an IP02 and have no issues, can you make sure you have reset your configs and that you are only navigating to the ip address eg http://192.168.1.100 not http://192.168.1.100/config/index.html Thanks Jason

	Administrator has disabled public posting

15 Top

Oct-19-10 16:15:27

ckleea Posts: 117	Re: Problem in GUI SVN 426 one more thing is should I install lighttpd?

	Administrator has disabled public posting

16 Top

Oct-19-10 16:34:16

ckleea Posts: 117	Re: Problem in GUI SVN 426 I wonder if you could send me your firmware for testing. I build several times. I can't make it work.

	Administrator has disabled public posting

17 Top

Oct-19-10 23:49:37

Albi90 Posts: 328	Re: Problem in GUI SVN 426 Hi ckleea Sure I can do that, I would rather work out whats wrong can u give me ssh access to your ip0x? Thanks Jason

	Administrator has disabled public posting

18 Top

Oct-20-10 01:19:32

ckleea Posts: 117	Re: Problem in GUI SVN 426 Hi Jason, It seems that the web server domain is not on. ftp and SSH work. CK

	Administrator has disabled public posting

19 Top

Oct-20-10 01:24:45

Albi90 Posts: 328	Re: Problem in GUI SVN 426 Do u have /usr/sbin/httpd on your ip0x? Thanks Jason

	Administrator has disabled public posting

20 Top

Oct-20-10 01:45:06

ckleea Posts: 117	Re: Problem in GUI SVN 426 No found.

	Administrator has disabled public posting

21 Top

Oct-20-10 03:31:17

Albi90 Posts: 328	Re: Problem in GUI SVN 426 Sorry ckleea i forgot to remove a few settings from the configs, should all be fixed in the SVN now. you will need to do a svn up, then remove the build dir and re make. Thanks Jason

	Administrator has disabled public posting

22 Top

Oct-20-10 03:48:57

ckleea Posts: 117	Re: Problem in GUI SVN 426 Hi Jason, I am now deleting all the files again and do a svn co. Will update you sometimes later when I am back to home for the firmware update. CK

	Administrator has disabled public posting

23 Top

Oct-20-10 06:03:22

ckleea Posts: 117	Re: Problem in GUI SVN 426 Hi Jason, Compilation is complete. At least I saw the httpd in usr/sbin which is linked to the /bin/busybox. However, I still can't find the iptables files. Try in the evening. CK

	Administrator has disabled public posting

24 Top

Oct-20-10 14:36:08

ckleea Posts: 117	Re: Problem in GUI SVN 426 Hi Jason, I must congratulate your revision and really appreciate the efforts made. The new GUI is really fast. I have no problem in installation. Thanks. CK

	Administrator has disabled public posting

25 Top

Oct-20-10 15:06:21

ckleea Posts: 117	Re: Problem in GUI SVN 426 As stated, iptables is not yet implemented in the compiled firmware. It is available n the svn sources and menuconfig.

	Administrator has disabled public posting

26 Top

Oct-20-10 15:14:48

Albi90 Posts: 328	Re: Problem in GUI SVN 426 Hi ckleea From what I can see Dimitar only enabled it in the br4 uClinux config, I will try to fix this tomorrow. Thanks Jason

	Administrator has disabled public posting

27 Top

Oct-21-10 04:12:28

Albi90 Posts: 328	Re: Problem in GUI SVN 426 Hi ckleea iptables should now work on IP01, let me know how you go!! Thanks Jason

	Administrator has disabled public posting

28 Top

Oct-21-10 09:59:44

ckleea Posts: 117	Re: Problem in GUI SVN 426 Jason, Till not yet completed. Missing a file sed -i 's/# CONFIG_USER_IPTABLES_IPTABLES is not set/CONFIG_USER_IPTABLES_UPTABLES=y/' /usr/src/switchfin_huild_ip01/uClinux-dist/config/.config sed: can't read usr/src/switchfin_huild_ip01/uClinux-dist/config/.config: no such file or directory. make: ***[usr/src/switchfin_huild_ip01/uClinux-dist/config/.configured] Error 2/ CK

	Administrator has disabled public posting

29 Top

Oct-21-10 10:07:16

Albi90 Posts: 328	Re: Problem in GUI SVN 426 Hi ckleea Fixed that in rev 429, please update Thanks Jason

	Administrator has disabled public posting

Page: 1

Index
» Developers
» GUI 4.0
» Problem in GUI SVN 426

Most Active Users

admin Albi90 Gilles Chewi luckman212 ckleea switchfinreseller spiga

Board Info

Board Stats: Total Users: 2587 Total Topics: 299 Total Polls: 1 Total Posts: 1727 Dormant
User Info: Newest User : user2553 Members Online: 0 Guests Online: 47