Home Forum Developers GUI 4.0 How can I tell if the httpd is running correctly?

JRPassphrase Registration Control

In order to register on this site, you must first submit the passphrase below.

TODO list for each hardware target can be found as sticky topic in the corresponding forum


switchfinreseller
useravatar
User Info

How can I tell if the httpd is running correctly?

I have a PR1 that I cannot get into the GUI.  It simply does not load.  I did a T1 config that seemed to have upset the box.  Upon reboot the GUI is down.  I can ssh in bit netstat -tuna does not show anything running on port 80.  I cannot fond a httpd srart, restart, enable command.  Can anyone steer me in the correct route to make sure my web GUI is configured to run correctly and how to manually start it at a command prompt and show it running?


Administrator has disabled public posting
switchfinreseller
useravatar
User Info

Re: How can I tell if the httpd is running correctly?

oh, my image is v400


Administrator has disabled public posting
switchfinreseller
useravatar
User Info

Re: How can I tell if the httpd is running correctly?

Well.. I compared a ps ax from my PR1 to an IP04 and found the IP04 showed asterisk -f and the PR1 does not have asterisk running at the moment due to a T1 config issue.

I did a asterisk -f on the PR1 in shh and the GU came alive.
I did a reset configuratuio to defualt and not save network settings.
I'm back to a factory E1 setup on my PR1.
Now to see if I can get it running T1 with e&m wink trunks again.

Wow, I just don't have a clue how the httpd service runs on switchfin.
???


Administrator has disabled public posting
Albi90
useravatar
User Info

Re: How can I tell if the httpd is running correctly?

On the old pre (426) builds you can check this by running
`asterisk -rvvvvv`
`http show status`

On (427+) you will need to check for httpd in the processes.

Thanks
Jason


Administrator has disabled public posting

Board Info

Board Stats:   Total Users: 2587  Total Topics: 299  Total Polls: 1  Total Posts: 1727  Dormant
User Info:   Newest User :  user2553   Members Online: 0   Guests Online: 47
Online  There are no members online
Topic
New
Locked
Topic
New
Locked
Sticky
Active
New/Active
Sticky
Active
New/Active
New/Closed
New Sticky
Closed/Active
New/Locked
New Sticky
Locked/Active
Active/Sticky
Sticky/Locked
Sticky Active Locked
Active/Sticky
Sticky/Locked
Sticky/Active/Locked