Am I crazy? I have flashed v383 without issues before this but I've just flashed a new IP04 with uImage-ip02-ip08-v383.img and the sound files are not there??? When flashing the only thing I have in question with my own efforts is I have been typing nand write 0x1000000 0x0 0x800000 and the v383 file size is 7864352 (780020 hex). I have been unable to find a otehr than 800000 that the IP04 will accpect in this statement. ??? warning: I am an extrmeme newbie with flashing the IP0X series...
Here's my initial boot output at the 232 console, (look at the lack of sound files decompressed):
Hit any key to stop autoboot: 0
Loading from device 0: NAND 256MiB 3,3V 8-bit (offset 0x0)
Image Name: Linux Kernel and ext2
Image Type: Blackfin Linux Kernel Image (gzip compressed)
Data Size: 7768654 Bytes = 7.4 MB
Load Address: 00001000
Entry Point: 001b71c8
Automatic boot of image at addr 0x02000000 ...
## Booting image at 02000000 ...
Image Name: Linux Kernel and ext2
Image Type: Blackfin Linux Kernel Image (gzip compressed)
Data Size: 7768654 Bytes = 7.4 MB
Load Address: 00001000
Entry Point: 001b71c8
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Starting Kernel at = 1b71c8
Linux version 2.6.28.10-ADI-2009R1.1switchfin (root@ucpbx1) (gcc version 4.1.2 (ADI svn)) #14 Sun Sep 19 11:36:27 EEST 2010
Board Memory: 64MB
Kernel Managed Memory: 64MB
Memory map:
fixedcode = 0x00000400-0x00000490
text = 0x00001000-0x00138220
rodata = 0x00138220-0x0018d388
bss = 0x0018e000-0x0019ff7c
data = 0x0019ff7c-0x001b0000
stack = 0x001ae000-0x001b0000
init = 0x001b0000-0x001c9000
available = 0x001c9000-0x02b00000
rootfs = 0x02b00000-0x03f00000
DMA Zone = 0x03f00000-0x04000000
Hardware Trace Active and Enabled
Boot Mode: 6
Blackfin support (C) 2004-2009 Analog Devices, Inc.
Compiled for ADSP-BF533 Rev 0.5
Blackfin Linux support by http://blackfin.uclinux.org/
Processor Speed: 400 MHz core clock and 133 MHz System Clock
NOMPU: setting up cplb tables
Instruction Cache Enabled for CPU0
Data Cache Enabled for CPU0 (write-back)
Built 1 zonelists in Zone order, mobility grouping off. Total pages: 10922
Kernel command line: ethaddr=00:09:45:56:20:29 console=ttyBF0,115200 root=/dev/mtdblock0 rw
Configuring Blackfin Priority Driven Interrupts
PID hash table entries: 256 (order: 8, 1024 bytes)
console [ttyBF0] enabled
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory available: 41636k/65536k RAM, (100k init code, 1244k kernel code, 480k data, 1024k dma, 572k reserved)
SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop... 796.67 BogoMIPS (lpj=1593344)
Security Framework initialized
Mount-cache hash table entries: 512
Blackfin Scratchpad data SRAM: 4 KB
Blackfin L1 Data A SRAM: 16 KB (13 KB free)
Blackfin L1 Data B SRAM: 16 KB (16 KB free)
Blackfin L1 Instruction SRAM: 64 KB (52 KB free)
net_namespace: 288 bytes
NET: Registered protocol family 16
Blackfin DMA Controller
ip0x_init(): chip_id=527A50CB,dspid=E5040005
ip0x_init(): registering device resources
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
NET: Registered protocol family 1
msgmni has been set to 81
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler cfq registered
Serial: Blackfin serial driver
bfin-uart.1: ttyBF0 at MMIO 0xffc00400 (irq = 21) is a BFIN-UART
brd: module loaded
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
dm9000 Ethernet Driver, V1.31
eth0: dm9000a at 20100000,20100002 IRQ 48 MAC: 00:09:45:56:20:29 (chip)
dm9000 dm9000.1: read wrong id 0x2b2a2903
dm9000 dm9000.1: read wrong id 0x2b2a290b
dm9000 dm9000.1: read wrong id 0x2b2a290b
dm9000 dm9000.1: read wrong id 0x2b2a290b
dm9000 dm9000.1: read wrong id 0x2b2a290b
dm9000 dm9000.1: read wrong id 0x2b2a290b
dm9000 dm9000.1: read wrong id 0x2b2a290b
dm9000 dm9000.1: read wrong id 0x2b2a290b
dm9000 dm9000.1: wrong id: 0x2b2a290b
dm9000 dm9000.1: not found (-19).
uclinux[mtd]: RAM probe address=0x2b00000 size=0x1400000
Creating 1 MTD partitions on "RAM":
0x00000000-0x01400000 : "ROMfs"
Generic platform RAM MTD, (c) 2004 Simtec Electronics
NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB 3,3V 8-bit)
Scanning device for bad blocks
Bad eraseblock 228 at 0x01c80000
Bad eraseblock 978 at 0x07a40000
Creating 3 MTD partitions on "NAND 256MiB 3,3V 8-bit":
0x00000000-0x00a00000 : "uImage"
0x00a00000-0x01400000 : "uImage backup"
0x01400000-0x10000000 : "persistent file system"
bfin-spi bfin-spi.0: Blackfin on-chip SPI Controller Driver, Version 1.0, regs_base@ffc00500, dma channel@5
bfin-wdt: initialized: timeout=20 sec (nowayout=0)
TCP cubic registered
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 100k freed
dma_alloc_init: dma_page @ 0x001c0000 - 256 pages at 0x03f00000
UBI: attaching mtd3 to ubi0
UBI: physical eraseblock size: 131072 bytes (128 KiB)
UBI: logical eraseblock size: 129024 bytes
UBI: smallest flash I/O unit: 2048
UBI: sub-page size: 512
UBI: VID header offset: 512 (aligned 512)
UBI: data offset: 2048
UBI: empty MTD device detected
UBI: create volume table (copy #1)
UBI: create volume table (copy #2)
UBI: attached mtd3 to ubi0
UBI: MTD device name: "persistent file system"
UBI: MTD device size: 236 MiB
UBI: number of good PEBs: 1886
UBI: number of bad PEBs: 2
UBI: max. allowed volumes: 128
UBI: wear-leveling threshold: 4096
UBI: number of internal volumes: 1
UBI: number of user volumes: 0
UBI: available PEBs: 1864
UBI: total number of reserved PEBs: 22
UBI: number of PEBs reserved for bad PEB handling: 18
UBI: max/mean erase counter: 0/0
UBI: background thread "ubi_bgt0d" started, PID 184
UBI device number 0, total 1886 LEBs (243339264 bytes, 232.1 MiB), available 1864 LEBs (240500736 bytes, 229.4 MiB), LEB si)
UBI: mtd3 is detached from ubi0
ubiformat: mtd3 (NAND), size 247463936 bytes (236.0 MiB), 131072 eraseblocks of 131072 bytes (128.0 KiB), min. I/O size 204s
libscan: scanning eraseblock 1887 -- 100 % complete
ubiformat: 78 eraseblocks have valid erase counter, mean value is 1
ubiformat: 1808 eraseblocks are supposedly empty
ubiformat: bad eraseblocks: 68, 818
ubiformat: warning!: only 78 of 1886 eraseblocks have valid erase counter
ubiformat: erase counter 0 will be used for all eraseblocks
ubiformat: note, arbitrary erase counter value may be specified using -e option
ubiformat: use erase counter 0 for all eraseblocks
ubiformat: formatting eraseblock 1858 -- 98 % complete UBI: attaching mtd3 to ubi0
ubiformat: formatting eraseblock 1863 -- 98 % compleUBI: physical eraseblock size: 131072 bytes (128 KiB)
ubiformat: formatting eraseblock 1887 -- 100 % complete
UBI: logical eraseblock size: 129024 bytes
UBI: smallest flash I/O unit: 2048
UBI: sub-page size: 512
UBI: VID header offset: 512 (aligned 512)
UBI: data offset: 2048
UBI: attached mtd3 to ubi0
UBI: MTD device name: "persistent file system"
UBI: MTD device size: 236 MiB
UBI: number of good PEBs: 1886
UBI: number of bad PEBs: 2
UBI: max. allowed volumes: 128
UBI: wear-leveling threshold: 4096
UBI: number of internal volumes: 1
UBI: number of user volumes: 0
UBI: available PEBs: 1864
UBI: total number of reserved PEBs: 22
UBI: number of PEBs reserved for bad PEB handling: 18
UBI: max/mean erase counter: 2/0
UBI: background thread "ubi_bgt0d" started, PID 195
UBI device number 0, total 1886 LEBs (243339264 bytes, 232.1 MiB), available 1864 LEBs (240500736 bytes, 229.4 MiB), LEB si)
Set volume size to 240500736
Volume ID 0, size 1864 LEBs (240500736 bytes, 229.4 MiB), LEB size 129024 bytes (126.0 KiB), dynamic, name "persistent", al1
UBIFS: default file-system created
UBIFS: mounted UBI device 0, volume 0, name "persistent"
UBIFS: file system size: 239081472 bytes (233478 KiB, 228 MiB, 1853 LEBs)
UBIFS: journal size: 11999232 bytes (11718 KiB, 11 MiB, 93 LEBs)
UBIFS: media format: 4 (latest is 4)
UBIFS: default compressor: LZO
UBIFS: reserved for root: 5182151 bytes (5060 KiB)
Checking for upload image to program
Can not find persistent configuration files
We are going to unpack default configuration!!!
persistent/
persistent/sounds/
persistent/sounds/thank-you-for-calling.gsm
persistent/sounds/record/
persistent/sounds/otherwise.gsm
persistent/sounds/pls-hold-while-try.gsm
persistent/sounds/if-u-know-ext-dial.gsm
persistent/sounds/to-reach-operator.gsm
persistent/tftp/
persistent/etc/
persistent/etc/dahdi/
persistent/etc/fw_env.config
persistent/etc/HOSTNAME
persistent/etc/asterisk.sh
persistent/etc/network.sh
persistent/etc/ssmtp/
persistent/etc/ssmtp/ssmtp.conf
persistent/etc/on_reset_released.sh
persistent/etc/archive.sh
persistent/etc/ntp.conf
persistent/etc/asterisk/
persistent/etc/asterisk/iax.conf
persistent/etc/asterisk/musiconhold.conf
persistent/etc/asterisk/extensions.ael
persistent/etc/asterisk/cdr_manager.conf
persistent/etc/asterisk/smdi.conf
persistent/etc/asterisk/providers.conf
persistent/etc/asterisk/sip.conf
persistent/etc/asterisk/extconfig.conf
persistent/etc/asterisk/voicemail.conf
persistent/etc/asterisk/dundi.conf
persistent/etc/asterisk/logger.conf
persistent/etc/asterisk/followme.conf
persistent/etc/asterisk/cdr_custom.conf
persistent/etc/asterisk/phoneprov.conf
persistent/etc/asterisk/features.conf
persistent/etc/asterisk/fax2email.conf
persistent/etc/asterisk/cdr.conf
persistent/etc/asterisk/sip_notify.conf
persistent/etc/asterisk/dnsmgr.conf
persistent/etc/asterisk/privacy.conf
persistent/etc/asterisk/reset_config
persistent/etc/asterisk/indications.conf
persistent/etc/asterisk/queuerules.conf
persistent/etc/asterisk/users.conf
persistent/etc/asterisk/iaxprov.conf
persistent/etc/asterisk/queues.conf
persistent/etc/asterisk/fxotune.conf
persistent/etc/asterisk/asterisk.conf
persistent/etc/asterisk/ooh323.conf.sample
persistent/etc/asterisk/inadyn.conf
persistent/etc/asterisk/tools/
persistent/etc/asterisk/tools/sysinfo
persistent/etc/asterisk/cli_aliases.conf
persistent/etc/asterisk/rtp.conf
persistent/etc/asterisk/manager.conf
persistent/etc/asterisk/rc_org.conf
persistent/etc/asterisk/adsi.conf
persistent/etc/asterisk/extensions.lua
persistent/etc/asterisk/http.conf
persistent/etc/asterisk/guipreferences.conf
persistent/etc/asterisk/chan_dahdi.conf
persistent/etc/asterisk/modules.conf
persistent/etc/asterisk/networking.conf
persistent/etc/asterisk/agents.conf
persistent/etc/asterisk/dhcpd.conf
persistent/etc/asterisk/codecs.conf
persistent/etc/asterisk/meetme.conf
persistent/etc/asterisk/extensions.conf
persistent/etc/asterisk/gui_confighw.conf
persistent/etc/asterisk/dahdi_scan.conf
persistent/etc/asterisk/modprobe_default
persistent/etc/asterisk/enum.conf
persistent/etc/parse.sh
persistent/etc/checkgateway.sh
persistent/etc/config/
persistent/etc/config/crontab
persistent/etc/nss_mdns.conf
persistent/etc/network.conf
persistent/etc/udhcpd.conf
persistent/etc/passwd
persistent/etc/rcparse.sh
persistent/etc/vlan.sh
persistent/etc/rotatecdr.sh
persistent/etc/rc.d/
persistent/etc/rc.d/S50asterisk
persistent/etc/rc.d/S30ntp
persistent/etc/rc.d/S90asteriskwatch
persistent/etc/rc.d/S40dahdi
persistent/etc/rc.d/S55vlan
persistent/etc/rc.d/S10network
persistent/etc/rc.d/S35cron
persistent/etc/init.d/
persistent/etc/init.d/dahdi
persistent/etc/init.d/asterisk
persistent/etc/init.d/pppoe
persistent/etc/init.d/asteriskwatch
persistent/etc/init.d/inadyn
persistent/etc/init.d/network
persistent/etc/init.d/cron
persistent/etc/init.d/dhcpd
persistent/etc/init.d/mdnsd
persistent/etc/init.d/ntp
persistent/etc/init.d/vlan
persistent/etc/ppp/
persistent/etc/ppp/chap-secrets
persistent/etc/ppp/pppoe.conf
persistent/etc/ppp/pap-secrets
persistent/etc/ppp/options
persistent/etc/ppp/resolv.conf
persistent/etc/ntp/
persistent/etc/cleanps.sh
persistent/usr/
persistent/usr/share/
persistent/usr/share/zoneinfo/
persistent/usr/share/zoneinfo/NZST-12NZDT
persistent/usr/share/zoneinfo/BDT-6
persistent/usr/share/zoneinfo/MST7MDT
persistent/usr/share/zoneinfo/EST5EDT
persistent/usr/share/zoneinfo/IRDT
persistent/usr/share/zoneinfo/PKT-5
persistent/usr/share/zoneinfo/SST11
persistent/usr/share/zoneinfo/ICT-7
persistent/usr/share/zoneinfo/GST-4
persistent/usr/share/zoneinfo/IST-5:30
persistent/usr/share/zoneinfo/NST3:30NDT
persistent/usr/share/zoneinfo/PST8PDT
persistent/usr/share/zoneinfo/AFT-4:30
persistent/usr/share/zoneinfo/GMT-3
persistent/usr/share/zoneinfo/AZOT1AZOST
persistent/usr/share/zoneinfo/HST10
persistent/usr/share/zoneinfo/CST-9:30CST
persistent/usr/share/zoneinfo/EET-2EEST
persistent/usr/share/zoneinfo/GMT0BST
persistent/usr/share/zoneinfo/CST6CDT
persistent/usr/share/zoneinfo/GMT-2
persistent/usr/share/zoneinfo/AST4ADT
persistent/usr/share/zoneinfo/AST-3
persistent/usr/share/zoneinfo/ChST-10
persistent/usr/share/zoneinfo/NRT-12
persistent/usr/share/zoneinfo/WST-8
persistent/usr/share/zoneinfo/CET-1CEST
persistent/usr/share/zoneinfo/MAGT-11MAGST
persistent/usr/share/zoneinfo/JST-9
persistent/var/
persistent/var/lib/
persistent/var/lib/asterisk/
persistent/var/lib/asterisk/agi-bin/
persistent/var/lib/asterisk/agi-bin/ip.sh
persistent/var/lib/asterisk/firmware/
persistent/var/lib/asterisk/firmware/iax/
persistent/var/lib/asterisk/gui_backups/
persistent/var/log/
persistent/var/log/asterisk/
persistent/var/log/asterisk/cdr-csv/
Checking if the reset button is pressed
mmc_spi spi0.0: ASSUMING 3.2-3.4 V slot power
mmc_spi spi0.0: SD/MMC host mmc0, no DMA, no WP, no poweroff
mmc_spi spi0.0: requested mode not fully supported
mmc_spi spi0.0: can't change chip-select polarity
mount: mounting /dev/mmcblk0p1 on /mnt/sd failed: No such device or address
no sd/mmc card found
eth0: link down
dahdi: Telephony Interface Registered on major 196
dahdi: Version: 2.3.0.1
bfsi_sport_init res: 1
After DASIY
port: 1 port_type: S
port: 2 port_type: S
port: 3 port_type: O
port: 4 port_type: -
port: 5 port_type: -
port: 6 port_type: -
port: 7 port_type: -
port: 8 port_type: -
ProSLIC module is Si3215
Start manual calibration
Module 0: Installed -- AUTO FXS
ProSLIC module is Si3215
Start manual calibration
Module 1: Installed -- AUTO FXS
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Module 2: Installed -- AUTO FXO (FCC mode)
Found: Blackfin IP0x (8 modules)
wcfxs_init_ok = 1
Notice: Configuration file is /etc/dahdi/system.conf
line 0: Unable to open configuration file '/etc/dahdi/system.conf'
1 error(s) detected
VLAN not configured!
The watchdog timeout has been set to 27 seconds
dahdi_echocan_oslec: Registered echo canceler 'OSLEC'
dahdi: Registered tone zone 0 (United States / North America)
ping: bad address 'downloads.digium.com'
__________________________________________________
/ \
/ Welcome to the uClinux distribution \
a8888b. / ______ _ _ ______ (TM) \
d888888b. / / ____/ _ _ (_)_ ___ / / / ___(_)____ |
8P"YP"Y88 / / /__ / / / / / /_/ __/ /_ / /_ / / __ \ |
8|o||o|88 \ (____ )/ /_/\/ / / __/ / / _ \/ __/ / / / / |
8' .88 \ _____/ / / / /_/ /_/ / / / / / / / / / |
8`._.' Y8. \ /______/_ \.___.d| .' - http://blackfin.uclinux.org
`--..__)8888P`._.' - http://www.asterisk.org
ent/etc/rc.d/S90asteriskwatch
persistent/etc/rc.d/S40dahdi
persistent/etc/rc.d/S55vlan
persistent/etc/rc.d/S10network
persistent/etc/rc.d/S35cron
persistent/etc/init.d/
persistent/etc/init.d/dahdi
persistent/etc/init.d/asterisk
persistent/etc/init.d/pppoe
persistent/etc/init.d/asteriskwatch
persistent/etc/init.d/inadyn
persistent/etc/init.d/network
persistent/etc/init.d/cron
persistent/etc/init.d/dhcpd
persistent/etc/init.d/mdnsd
persistent/etc/init.d/ntp
persistent/etc/init.d/vlan
persistent/etc/ppp/
persistent/etc/ppp/chap-secrets
persistent/etc/ppp/pppoe.conf
persistent/etc/ppp/pap-secrets
persistent/etc/ppp/options
persistent/etc/ppp/resolv.conf
persistent/etc/ntp/
persistent/etc/cleanps.sh
persistent/usr/
persistent/usr/share/
persistent/usr/share/zoneinfo/
persistent/usr/share/zoneinfo/NZST-12NZDT
persistent/usr/share/zoneinfo/BDT-6
persistent/usr/share/zoneinfo/MST7MDT
persistent/usr/share/zoneinfo/EST5EDT
persistent/usr/share/zoneinfo/IRDT
persistent/usr/share/zoneinfo/PKT-5
persistent/usr/share/zoneinfo/SST11
persistent/usr/share/zoneinfo/ICT-7
persistent/usr/share/zoneinfo/GST-4
persistent/usr/share/zoneinfo/IST-5:30
persistent/usr/share/zoneinfo/NST3:30NDT
persistent/usr/share/zoneinfo/PST8PDT
persistent/usr/share/zoneinfo/AFT-4:30
persistent/usr/share/zoneinfo/GMT-3
persistent/usr/share/zoneinfo/AZOT1AZOST
persistent/usr/share/zoneinfo/HST10
persistent/usr/share/zoneinfo/CST-9:30CST
persistent/usr/share/zoneinfo/EET-2EEST
persistent/usr/share/zoneinfo/GMT0BST
persistent/usr/share/zoneinfo/CST6CDT
persistent/usr/share/zoneinfo/GMT-2
persistent/usr/share/zoneinfo/AST4ADT
persistent/usr/share/zoneinfo/AST-3
persistent/usr/share/zoneinfo/ChST-10
persistent/usr/share/zoneinfo/NRT-12
persistent/usr/share/zoneinfo/WST-8
persistent/usr/share/zoneinfo/CET-1CEST
persistent/usr/share/zoneinfo/MAGT-11MAGST
persistent/usr/share/zoneinfo/JST-9
persistent/var/
persistent/var/lib/
persistent/var/lib/asterisk/
persistent/var/lib/asterisk/agi-bin/
persistent/var/lib/asterisk/agi-bin/ip.sh
persistent/var/lib/asterisk/firmware/
persistent/var/lib/asterisk/firmware/iax/
persistent/var/lib/asterisk/gui_backups/
persistent/var/log/
persistent/var/log/asterisk/
persistent/var/log/asterisk/cdr-csv/
Checking if the reset button is pressed
mount: mounting /dev/mmcblk0p1 on /mnt/sd failed: No such device or address
no sd/mmc card found
Notice: Configuration file is /etc/dahdi/system.conf
line 0: Unable to open configuration file '/etc/dahdi/system.conf'
1 error(s) detected
VLAN not configured!
The watchdog timeout has been set to 27 seconds
ping: bad address 'downloads.digium.com'
__________________________________________________
/ \
/ Welcome to the uClinux distribution \
a8888b. / ______ _ _ ______ (TM) \
d888888b. / / ____/ _ _ (_)_ ___ / / / ___(_)____ |
8P"YP"Y88 / / /__ / / / / / /_/ __/ /_ / /_ / / __ \ |
8|o||o|88 \ (____ )/ /_/\/ / / __/ / / _ \/ __/ / / / / |
8' .88 \ _____/ / / / /_/ /_/ / / / / / / / / / |
8`._.' Y8. \ /______/_
IP02/IP04/IP08 powered by Switchfin
IP04 login:
CTRL-A Z for help |115200 8N1 | NOR | Minicom 2.4 | VT102 |
